Who we are ALBEM is a leader company specialized in delivering all kinds of Maintenance solutions & Engineering services.
What we do Our aim is to develop, improve, implement and evaluate integrated systems from the following aspects: equipment minimum cost supply, equipment performance, services, installation along with information and knowledge increase.
We help customers develop their energy resources; bringing world class capability and delivering it locally. We promote commercial arrangements that are aligned to our customers’ needs, allowing us to deliver more value to the customer while increasing the returns from our most precious asset.
Intellectual Capital: People.
Engineering know-how.
Value Based Management.
Provide technically sound solutions and create additional value in mutual interest with our customers resulting in being a preferred manufacturer and supply their requirements.
ALBEM design, supply, Re-tube and replacement complete heat-exchanger. ALBEM provide effective solutions for heat-exchanger maintains solutions (design, supply, Re-tube).
ALBEM Supply, install and maintain an overhead crane (bridge crane), Jib crane and Gantry crane. What type of crane do I need? It is very important to understand the types of lifting systems available and how they differ from each other. Spending a few minutes now discussing the needs of your application could save you thousands of dollars (not to mention the value of improved safety) in the future. However, customers should also give some thought to the following questions: 1. Lifting capacity 2. Lifting height 3. Working class (how many hours the crane will work in one working day?). 4. Working environment (temperature, humidity, elevation) 5- How many axes of hook movement I need (e.g., up/down, left/right, and forward/back) one, two or three. 6- If two axes how long runway? If three axes how long of runway and width? Below we provide some basic information about each type of crane, but the ALBEM sales team and engineers will be more than happy to assist you through the process of choosing the right lifting system.
With a monorail system, the hoist and trolley run on a single stationary beam. Because of their inherent speed and efficiency, monorail systems are an effective method of moving and positioning loads to specific locations. Provides two axis of hook motion (X and Y).
A bridge crane runs on an elevated runway system along the length of a factory and provides three axis of hook motion (X, Y, and Z). Types of Bridge Cranes: • Top Running Bridge Crane. • Underhung Bridge Crane. • Single girder. • Double girder.
This type of crane consists of a pivoting head and boom assembly which carries a hoist and trolley unit. The pivoting head is supported either by a floor-mounted mast providing up to 360 degree.
Gantry cranes are usually considered when there is a reason not to incorporate an overhead runway system. These are typically used for an outdoor application or below an existing overhead bridge crane system. Gantries can run on track, rail, or directly on the floor, depending on required usage, length of travel and load capacities.
+34 694 795 358
sales@albem.energy
Spain
.JPG)
Tele Radio develops, manufactures and markets radio control systems for industrial use. The company was founded in Lysekil in 1955 and has since developed into an expansive group, the Tele Radio Group. The head office is in Askim just outside of Gothenburg and there are ten subsidiary companies in Europe, the USA and in Asia. In addition to our subsidiary companies we also cooperate with our dealers and partners all over the world. The research and development of all our products is done by Tele Radio. With more than 50 years of experience we have solid knowledge and experience of radio control systems. Our mission is to "never say no" when it is at all possible to satisfy your needs; our goal is to offer a radio control system for your specific application. We reach these goals by making all our employees actively be part of the process and take responsibility for their respective areas of work.
Carpmetal is an Italian company with thirty years of experience on industrial lifting and stellwork. arpmetal was founded in 1968 as “Calabria Ovido snc” from an idea of mr Calabria and began his steelwork activity on producing gates, fences, garages, smith work and assembly on site. In 1974 we specialize in the lifting sector with the installation of bridge crane and later with the construction of runways. the 29th January 1975 we release first overhead crane of the Calabria Ovid Snc . Since then Carpmetal offers its customers products of the highest quality completely designed and built in Italy and simultaneously provides services of installation, assembly and Support for maintenance and repair. Carpmetal builds double girder bridge cranes, single girder bridge cranes, gantry cranes, gantry lame cranes, jib cranes, walking cranes. It also offers kits for bridge cranes with heads carry wheels, electrical systems, hoist trolleys, etc... In May 1988 Carpmetal release the serial number 1000, in April 1996, the number 2000 and in 2003 the crane number 3000. This numbers show the longevity and the gained long-standing experience over the years by Carpmetal, waiting to proudly announce the serial number 4000
Raal is a manufacturer of complete cooling systems and heat exchangers made of aluminum alloys and stainless steel, in brazed construction: radiators, oil coolers, air coolers, condensers and combined coolers, designed for agricultural, construction, industrial equipment and automotive applications. Cooling systems components Heat exchangers (according to the application) Radiators Oil coolers (for engine, hydraulic, and transmission ) Charge air coolers Fuel Coolers Condensers Metallic structures, including housings and protection grids components Fans, hydraulic and electric motors, valves, and other.
Is involved more than 30 years in designing manufacturing of:
